是否进口:是 | 原产国/地区:美国 | 厂家(产地):基础创新塑料(美国) |
牌号:HP1 | 销售方式:品牌经销 | 类型:标准料 |
加工级别:注塑级、 挤出级 | 特性级别:透明级、 标准级 | 用途级别:食品级、 医用级 |
LEXAN鈩 HOMOPOLYMER
HP1
REGION AMERICAS
DESCRIPTION
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change,
biocompatible (ISO10993 or USP Class VI). EtO sterilizable. Contains mold release.
TYPICAL PROPERTY VALUES
PROPERTIES TYPICAL VALUES UNITS TEST METHODS
MECHANICAL
Tensile Stress, yld, Type I, 50 mm/min 62 MPa ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min 65 MPa ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min 6 % ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min 120 % ASTM D 638
Tensile Modulus, 50 mm/min 2370 MPa ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 93 MPa ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span 2300 MPa ASTM D 790
Hardness, Rockwell M 70 - ASTM D 785
Hardness, Rockwell R 118 - ASTM D 785
Taber Abrasion, CS-17, 1 kg 10 mg/1000cy ASTM D 1044
Tensile Stress, yield, 50 mm/min 63 MPa ISO 527
Tensile Stress, break, 50 mm/min 50 MPa ISO 527
Tensile Strain, yield, 50 mm/min 6 % ISO 527
Tensile Strain, break, 50 mm/min 70 % ISO 527
Tensile Modulus, 1 mm/min 2350 MPa ISO 527
Flexural Stress, yield, 2 mm/min 90 MPa ISO 178
Flexural Modulus, 2 mm/min 2300 MPa ISO 178
IMPACT
Izod Impact, unnotched, 23掳C 3204 J/m ASTM D 4812
Izod Impact, notched, 23掳C 640 J/m ASTM D 256
Izod Impact, notched (natural, tints) 640 J/m ASTM D 256
Tensile Impact, Type S 378 kJ/m虏 ASTM D 1822
Falling Dart Impact (D 3029), 23掳C 169 J ASTM D 3029
Instrumented Impact Energy @ peak, 23掳C 54 J ASTM D 3763
漏 2017 Copyright by SABIC. All rights reserved
Izod Impact, unnotched 80*10*4 +23掳C NA kJ/m虏 ISO 180/1U
Izod Impact, unnotched 80*10*4 -30掳C NA kJ/m虏 ISO 180/1U
Izod Impact, notched 80*10*4 +23掳C 12 kJ/m虏 ISO 180/1A
Izod Impact, notched 80*10*4 -30掳C 10 kJ/m虏 ISO 180/1A
Charpy 23掳C, V-notch Edgew 80*10*4 sp=62mm 12 kJ/m虏 ISO 179/1eA
Charpy -30掳C, V-notch Edgew 80*10*4 sp=62mm 10 kJ/m虏 ISO 179/1eA
THERMAL
HDT, 1.82 MPa, 3.2mm, unannealed 126 掳C ASTM D 648
HDT, 0.45 MPa, 6.4 mm, unannealed 137 掳C ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed 126 掳C ASTM D 648
CTE, -40掳C to 95掳C, flow 6.84E-05 1/掳C ASTM E 831
Specific Heat 1.25 J/g-掳C ASTM C 351
Thermal Conductivity 0.19 W/m-掳C ASTM C177
Thermal Conductivity 0.2 W/m-掳C ISO 8302
CTE, 23掳C to 80掳C, flow 7.E-05 1/掳C ISO 11359-2
Ball Pressure Test, 125掳C +/- 2掳C PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 139 掳C ISO 306
Vicat Softening Temp, Rate B/120 140 掳C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 133 掳C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 121 掳C ISO 75/Ae
Relative Temp Index, Elec 130 掳C UL 746B
Relative Temp Index, Mech w/impact 130 掳C UL 746B
Relative Temp Index, Mech w/o impact 130 掳C UL 746B
PHYSICAL
Specific Gravity 1.2 - ASTM D 792
Specific Volume 0.83 cm鲁/g ASTM D 792
Density 1.19 g/cm鲁 ASTM D 792
Water Absorption, 24 hours 0.15 % ASTM D 570
Water Absorption, equilibrium, 23C 0.35 % ASTM D 570
Water Absorption, equilibrium, 100掳C 0.58 % ASTM D 570
Mold Shrinkage, flow, 3.2 mm (5) 0.5 鈥 0.7 % SABIC method
Melt Flow Rate, 300掳C/1.2 kgf 25 g/10 min ASTM D 1238
Melt Volume Rate, MVR at 300掳C/1.2 kg 23 cm鲁/10 min ISO 1133
OPTICAL
Light Transmission, 2.54 mm 88 % ASTM D 1003
Haze, 2.54 mm 1 % ASTM D 1003
Refractive Index 1.586 - ASTM D542
ELECTRICAL
PROPERTIES TYPICAL VALUES UNITS TEST METHODS
漏 2017 Copyright by SABIC. All rights reserved
Volume Resistivity >1.E+17 Ohm-cm ASTM D 257
Dielectric Strength, in air, 3.2 mm 14.9 kV/mm ASTM D 149
Relative Permittivity, 50/60 Hz 3.17 - ASTM D 150
Relative Permittivity, 1 MHz 2.96 - ASTM D 150
Dissipation Factor, 50/60 Hz 0.0009 - ASTM D 150
Dissipation Factor, 1 MHz 0.01 - ASTM D 150
Hot Wire Ignition {PLC) 2 PLC Code UL 746A
High Voltage Arc Track Rate {PLC} 2 PLC Code UL 746A
High Ampere Arc Ign, surface {PLC} 1 PLC Code UL 746A
Comparative Tracking Index (UL) {PLC} 2 PLC Code UL 746A
Volume Resistivity >1.E+15 Ohm-cm IEC 60093
Surface Resistivity, ROA >1.E+15 Ohm IEC 60093
Dielectric Strength, in oil, 3.2 mm 17 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 2.7 - IEC 60250
Dissipation Factor, 50/60 Hz 0.001 - IEC 60250
Dissipation Factor, 1 MHz 0.01 - IEC 60250
Relative Permittivity, 50/60 Hz 2.7 - IEC 60250
FLAME CHARACTERISTICS
UL Recognized, 94V-2 Flame Class Rating (3) 1.09 mm UL 94
Oxygen Index (LOI) 25 % ISO 4589
INJECTION MOLDING
Drying Temperature 120 掳C
Drying Time 3 鈥 4 hrs
Drying Time (Cumulative) 48 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 270 鈥 295 掳C
Nozzle Temperature 265 鈥 290 掳C
Front - Zone 3 Temperature 270 鈥 295 掳C
Middle - Zone 2 Temperature 260 鈥 280 掳C
Rear - Zone 1 Temperature 250 鈥 270 掳C
Mold Temperature 70 鈥 95 掳C
Back Pressure 0.3 鈥 0.7 MPa
Screw Speed 40 鈥 70 rpm
Shot to Cylinder Size 40 鈥 60 %
Vent Depth 0.025 鈥 0.076 mm
PROPERTIES TYPICAL VALUES UNITS TEST METHODS
漏 2017 Copyright by SABIC. All rights reserved
DESCRIPTION
TBD
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a 鈥渟eller鈥), is made exclusively under seller鈥檚 standard conditions of sale
(available upon request) unless agreed otherwise in writing and signed on behalf of the seller. While the information contained herein
is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND
NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT
TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY
APPLICATION. Each customer must determine the suitability of seller materials for the customer鈥檚 particular use through appropriate
testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be
construed, to grant any license under any patent or other intellectual property right.